I made a case of YAESU FT-817
I have been playing YAESE's FT-817 transceiver in a military radio case case than before. I wanted to see it, so I want you to release it, I have released a voice that there is.
Since all uses acrylic of 1 mm to 5 mm thick, strength is reasonable, it is simply a self-satisfying item.
FT - 817 is an all - mode transceiver of HF / VHF / UHF, but it is very compact. Although it is good for use in horizontal placement, it is extremely poor stability when used upright. The way I thought about doing something, it became like this form.
On the front, the U - 183 / U is installed so that a military handset (H - 250 etc.) can be used, and the speaker separation switch and normal RJ - 45 connector for microphone, headphone jack (standard, mini stereo) , A jack for a key, and a DC jack for power supply.
Painting is a classic OD color (olive drag).
Please guess the production method. A reference page of acrylic processing is here
In addition, it is made by a hobby, it is not for sale.
[In addition, it is not for sale by the thing products with the my hobby.]
Front and top. 5P connector is military U-183 / U.
The front and back. On the back are two foldable tilt feet and speakers.
(Tilt feet, Takachi Denki TI type tilt stand [TI - 70B] 1 piece
The side connector, the state of the switch and the state of the rear power jack.
Name plate production here
thanks for the share (ENGLISH)
ja8fev
http://www.tristate.ne.jp/ja8fev/hamradio/ft817m/ft817m.htm
Could this same kind of military box, be designed around a Yaesu FT-857ND? I ask because I love the design and would love to see if a similar military box, could be done for the 857ND.
ReplyDelete